GVERSE Geomodeling

GVERSE Geomodeling is a sophisticated integrated solution for subsurface geological/reservoir modeling. Detailed analysis of the reservoir is always crucial prior to field and well planning. With GVERSE Geomodeling, making an informed decision is much easier as this application supports numerous types of data sources for a comprehensive understanding of the petroleum system.

The integrated application combines geological, geophysical, petrophysical, GIS, and engineering data in a single environment, with real-time 3D visualization of the developing geomodel that helps interpret the results from different domains of geosciences and formulate optimized and cost-effective field development solutions.

Surface relationships are modeled in a dynamic real-time environment. The geosurface model can be configured to generate surface conformance relationships, unconformity trimming, channel geometries, subcrop mapping, fault offset and automatic fault polygon generation, as well as gross, net, and net/gross reservoir maps.

 
GVERSE Geomodeling
GVERSE Geomodeling
 


GVERSE Geomodeling 2019.2 (New Features)

Block Diagrams

Display Distance between wells in Block Diagram

Display Boundary Distance

Display Well and Boundary Distances for Specific Formations in Block Diagram

Modeling Regions

Aggregate Surface Color Fills

Add/Select Surface and Fault Points on Fence Diagrams

Apply Custom Display Properties to Wellbores in Block Diagram

Single Surface Mode

List Wells with Well Name, Number, Operator, and Status

Spline Polygons

Apply Depth Interval Using Inclination Angle

Add/Remove Multiple Wells from Geomodel

Well Preview in Cross Section View

Toggle On/Off Well and Interwell Points Using Context Menu

Quick Access Toolbar

Clipping Box Enhancements



Real-time Integrated Visualization of Results
GVERSE Geomodeling provides an integrated real-time map view, cross section view, and 3D visualization of the developing geomodel. GVERSE Geomodeling integrates petrophysical, geophysical, drilling, and GIS data into the interpretation to observe the real time effect of what-if scenarios on a developing geomodel.

Quick and Easy
As compared to traditional tools, GVERSE Geomodeling allows geoscientists to load, integrate, interpret, and display large datasets with minimum time and effort required.

Flexibility
Features like the ability to Quick Pick surface tops and fault cuts on cross sections and the map view, clip the 3D gird, develop fence diagrams, create modeling regions, and define well group annotations to offer greater flexibility in the interpretation workflow. Docking windows and panels provide the freedom to arrange the workspace as desired. Saving the interpretation configuration of the workspace enables the user to resume the work from where they left off after closing the previous session.

Integration
Observe the multi-disciplinary relationships in your geomodel with tightly integratred and synchronous Map, Cross Section and 3D views. GVERSE Geomodeling is designed for the geoscientists who work on integrated data sets that include geological, petrophysical, geophysical, drilling, and GIS data. It includes an integrated map, cross section, and 3D view of the geomodel which enables you to work in 2D or 3D views simultaneously. Use the GeoSurface Model tool to efficiently source and generate surfaces and faults and model complex geometries such as unconformities, channels, and subcrop maps, conformance relationships among surfaces, and fault offset and automatic fault polygon generation on all the views of GVERSE Geomodeling.

Integration with GVERSE Petrophysics
Considering the importance of petrophysics in understand the reservoir, the application facilitates the representation of petrophysical properties (i.e. porosity, saturation and geomechanics etc.) based on GVERSE Petrophysics models. These petrophysical modeling results can be displayed on the fence diagrams as curves to better understand the character of the reservoir or on presentation templates on the cross section view.

Integration with GVERSE Petrophysics..

Integration with GVERSE Geophysics
Incorporate your seismic interpretation into your geomodel with dynamically depth converted horizons, faults, and seismic backdrops on cross sections and fence diagrams. Update the velocity model with interpreted interwell points from your smartSTRAT geosteered well for the most up-to-date depth conversion possible.

Block Diagrams
GVERSE Geomodeling allows us to create block diagrams or gun plot sections that show intersection point of horizontal wellbore with the line of section as it drills through the target formations. In block diagrams, Line of section is laid perpendicular to the wellbore path and in the cross section view they show penetration point of horizontal wellbore drilling inside the target horizon. This helps the drillers in planning inside the drilling section unit as distances between wells can be shown in the block diagram. Absolute and horizontal distances between wells drilling inside the same target can be determined very easily in a block diagram. Likewise, Drilling Section Unit (DSU) boundary distances between corner wells and section boundary can also be determined in block diagram. Additionally, you can add formation thickness, distance filtering on the basis of formations and wellbore custom properties to get the complete picture of drilling wells and their placement inside the respective target formations.

Block Diagrams

Fence Diagrams
Facilitate a better understanding of the reservoir by creating fence diagrams of the open cross sections. This feature assists in analyzing and representing litho-stratigraphic relationships, pinchouts and truncations of units, unconformities, structural and stratigraphic traps within the reservoir.

Fence Diagrams

Co-blending
Validate the reservoir behavior by co-blending seismic attributes against interpolated curve properties, lateral lithofacies variation, and related structural geometries on cross sections and fence diagrams.

  Co-blending

Interpolation
Advance your understanding of the reservoir by analyzing different geological sections and identify lithofacies, stratigraphic sequences, and depositional trends from the logs. GVERSE Geomodeling interpolation helps you understand the interplay between lithofacies and depositional or structural trends.

Interpolation  

Clipping Planes
In a complex geomodel, clipping can play a significant role in examining the relationships among surfaces and faults. Using GVERSE Geomodeling clipping tool, you can easily clip planes vertically or horizontally to keep a specific portion of the scene's geometry in focus and analyze the trajectory of wells as they are drilled through geomodel surfaces.

Clipping Planes 

Completion and Perforation Postings
Display Completions stages and Perforation clusters along the wellbore path in 3D View to identify the productive zones of the targeted formations.

The following sections list the system requirements for the GVERSE Geomodeling.

Software

The software that must be installed on the system running the application are as follows:

  • GeoGraphix 2019.2
  • LMKR License Management Tool 2019.2 for GVERSE® Geomodeling license.
  • Microsoft DirectX End-User Runtime (June 2010)
  • Adobe Reader for selected help files (optional)

Operating System

To run the application, you need one of the following operating systems installed on your system:

  • Windows® 7 Professional x64
  • Windows® 7 Ultimate x64
  • Windows® 7 Enterprise x64
  • Windows® 10 Enterprise x64
  • Windows® 10 Professional x64

Note:It is recommend to use the latest Microsoft® service packs and security patches. Geomodeling specifically requires Windows platform update KB2670838 installed on the machine, in case the operating system is Windows 7.

Hardware

  • System: 8 GB (16+ GB recommended)
  • Graphics Card: 2 GB (4 GB recommended)
  • DirectX 11 capable hardware

Note: - We recommend using the latest video drivers and Microsoft updates for your system.

Licenses

The following licenses are required to run the application:

  • GeoGraphix license version 2019.2
  • GVERSE® Geomodeling license version 2019.2

The GVERSE® Geomodeling license is required to enable Model 3D view and Contours on Map view. Also note that FrameBuilder™ is part of the GVERSE® Geomodeling license.

Note: Refer to the LMKR Customer Support Portal (http://support.lmkr.com/) for up-to-date information on the requirements.